menu "RT-Thread rockchip common drivers" config RT_USING_CPU_USAGE bool "Enable CPU usage" depends on RT_USING_HOOK default n menuconfig HAL_DBG_ON bool "Enable HAL Debug Features" help Select to enable HAL built-in debug features. if HAL_DBG_ON config HAL_ASSERT_ON bool "Enable HAL Assert Features" help Select to enable HAL built-in assert features. config HAL_DBG_INFO_ON bool "Enable HAL Debug Info Features" help Select to enable HAL log with info level. config HAL_DBG_WRN_ON bool "Enable HAL Debug Warning Features" help Select to enable HAL log with warning level. config HAL_DBG_ERR_ON bool "Enable HAL Debug Error Features" help Select to enable HAL log with error level. endif config RT_USING_LOGBUFFER bool "Enable log buffer support" depends on RT_USING_DEVICE_IPC config RT_USING_SND_GLB_RST bool "Using second global reset" help CRU, Watchdog or TSADC reset SoC use second global reset. Otherwise use first global reset. config RT_USING_RESET bool "Enable reset support" config RT_USING_CRU_DUMP bool "Enable CRU_DUMP" depends on RT_USING_CRU default n config RT_USING_REGULATOR_DUMP bool "Enable REGULATOR_DUMP" default n if RT_USING_SDIO config MMC_FORCE_INTERNAL_BUF bool "Force driver use internal buf to cope with dma" default n endif config RT_USING_PROF_IRQ bool "Enable IRQ summary dump" depends on RT_USING_HOOK default n config RT_USING_PMIC bool "Enable PMIC" default n if RT_USING_PMIC config RT_USING_PMIC_RK817 bool "Enable PMIC RK817" default n config RT_USING_PMIC_RK816 bool "Enable PMIC RK816" default n endif if RT_USING_PMIC_RK816 config RT_USING_CHARGER_RK816 bool "Enable RK816 charger" depends on RT_USING_PM_CHARGER default n config RT_USING_FG_RK816 bool "Enable RK816 fuel gauge" depends on RT_USING_PM_FG default n config RT_USING_RTC_RK816 bool "Enable RK816 rtc" depends on RT_USING_RTC default n config RT_USING_SENSOR_RK816 bool "Enable RK816 battery temperature sensor" depends on RT_USING_SENSOR default n endif config RT_USING_PWM_REGULATOR bool "Enable Pwm Regulator" depends on RT_USING_PWM default n config RT_USING_CACHE bool "Enable cache" default y config RT_USING_UNCACHE_HEAP bool "Enable uncache heap" select RT_USING_MEMHEAP default n if RT_USING_UNCACHE_HEAP && ARCH_ARM_CORTEX_M config RT_UNCACHE_HEAP_ORDER hex "For MCU uncache heap size(0x0D=16KB, 0x0E=32KB, 0x0F=64KB)" range 0x0D 0x10 depends on RT_USING_UNCACHE_HEAP default 0x0E help set uncache heap size, it in tail of sram Examples: 0x0D => 16KB 0x0E => 32KB 0x0F => 64KB 0x10 => 128KB endif if RT_USING_UNCACHE_HEAP && ARCH_ARM_CORTEX_A config RT_UNCACHE_HEAP_SIZE hex "For AP uncache heap size(default 8M, 4K align)" depends on RT_USING_UNCACHE_HEAP default 0x800000 endif config RT_USING_LARGE_HEAP bool "Enable large heap" select RT_USING_MEMHEAP default n if RT_USING_LARGE_HEAP config RT_LARGE_MALLOC_THRRESH int "large heap malloc threshold" default 512 depends on RT_USING_LARGE_HEAP help the memory will allocate in large heap while the allocated size over this config RT_LARGE_HEAP_SIZE int "large heap size" default 524288 depends on RT_USING_LARGE_HEAP help the remaining memory must be able to accommodate this heap endif config RT_USING_DTCM_HEAP bool "Enable dtcm heap" select RT_USING_MEMHEAP default n if RT_USING_DTCM_HEAP config RT_DTCM_MALLOC_THRRESH int "dtcm heap malloc threshold" default 512 depends on RT_USING_DTCM_HEAP help the memory will allocate in dtcm heap while the allocated size over this endif config RT_USING_PSRAM_HEAP bool "Enable PSRAM heap" select RT_USING_MEMHEAP default n if RT_USING_PSRAM_HEAP config RT_PSRAM_MALLOC_THRRESH int "PSRAM heap malloc threshold" default 512 help the memory will allocate in PSRAM heap while the allocated size over this config RT_PSRAM_END_RESERVE int "The reserve bytes at the end of PSRAM" default 0 help Reserve x bytes at the end of PSRAM for special use, cache line aligned is needed. endif choice prompt "MIPI DSI Panel Type" depends on RT_USING_DSI default RT_USING_PANEL_SS if RKMCU_PISCES config RT_USING_PANEL_FPGA_LVDS bool "FPGA LVDS panel, reslution is 800x1280" config RT_USING_PANEL_SS bool "SS mipi panel, resolution is 1080x2340" config RT_USING_PANEL_S6E3FC2X01 bool "S6E3FC2X01 mipi panel, resolution is 1080x2340" config RT_USING_PANEL_S6E3HC2_X1 bool "S6E3HC2_X1 mipi panel, resolution is 1440x3120" config RT_USING_PANEL_S6E3HC2_X4 bool "S6E3HC2_X4 mipi panel, resolution is 720x1560" config RT_USING_PANEL_ST7703_DS bool "ST7703_DS mipi panel, resolution is 720x1280" config RT_USING_PANEL_ST7796H2 bool "ST7796H2 mipi panel, resolution is 320x385" config RT_USING_PANEL_AM018RT90211 bool "AM018RT90211 mipi panel, resolution is 368x448" config RT_USING_PANEL_AM014RT90327V0 bool "AM014RT90327V0 mipi panel, resolution is 454x454" config RT_USING_PANEL_H245QBN02 bool "H245QBN02 mipi panel, resolution is 240x432" endchoice choice prompt "MCU Panel Type" depends on RT_USING_VOP_MCU config RT_USING_PANEL_GC9306_CTC28 bool "CTC 2.8' MCU panel, reslution is 240x320" config RT_USING_PANEL_ST7789V_XF20 bool "xh2.0TFT-22P' MCU panel, reslution is 240x320" endchoice choice prompt "SPI Panel Type" depends on RT_USING_SPI_SCREEN config RT_USING_PANEL_KGM281G44PVAA bool "KGM281G44PVAA SPI panel, resolution is 80x160" config RT_USING_PANEL_H20B1301A bool "H20B1301A SPI panel, resolution is 176x220" endchoice config RT_USING_BACKLIGHT depends on RT_USING_DISPLAY bool "Enable Backlight Control" menu "Enable Fault Dump Hook" config RT_USNING_FAULT_DUMP_HOOK bool "Enable fault dump hook" default n depends on RT_USING_CMBACKTRACE if RT_USNING_FAULT_DUMP_HOOK config RT_FAULT_DUMP_BUFFER_SIZE int "Set fault dump buffer size" default 4096 endif endmenu menuconfig RT_USING_SNOR bool "Enable ROCKCHIP SPI NOR Flash" select RT_USING_MTD_NOR select RT_USING_FWANALYSIS default n if RT_USING_SNOR config RT_SNOR_SPEED int "Reset the speed of SPI Nor flash in Hz" default 80000000 help Reset the speed of SPI Nor flash based on SPI Nor characteristics, usually it range from 80MHz to 133MHz. config RT_SNOR_DUAL_IO bool "Set SPI Host DUAL IO Lines" default n config RT_ROOT_DEF_PART_OFFSET bool "Enable SPI Nor flash default partition offset" default n config RT_ROOT_PART_OFFSET int "Define SPI Nor flash default partition offset" default 25165824 depends on RT_ROOT_DEF_PART_OFFSET help The partition offset must be keep same with rootfs offset in parameter.txt config RT_ROOT_DEF_PART_SIZE bool "Enable SPI Nor flash default partition size" default n config RT_ROOT_PART_SIZE int "Define SPI Nor flash default partition size" default 1048576 depends on RT_ROOT_DEF_PART_SIZE choice prompt "Choose SPI Nor Flash Adapter" default RT_USING_SNOR_FSPI_HOST config RT_USING_SNOR_FSPI_HOST bool "Attach FSPI controller to SNOR" config RT_USING_SNOR_SFC_HOST bool "Attach SFC controller to SNOR" config RT_USING_SNOR_SPI_HOST bool "Attach SPI controller to SNOR" if RT_USING_SNOR_SPI_HOST config RT_SNOR_SPI_DEVICE_NAME string "the name of the SPI device which is used as SNOR adapter" default "spi2_0" endif endchoice endif menu "RT-Thread rockchip jpeg enc driver" config RT_USING_JPEG_ENC bool "Enable jpeg enc" default n if RT_USING_JPEG_ENC config RT_USING_JPEG_ENC0 bool "Enable jpeg enc 0" depends on RT_USING_JPEG_ENC default n config RT_USING_JPEG_ENC1 bool "Enable jpeg enc 1" depends on RT_USING_JPEG_ENC default n endif endmenu menu "RT-Thread rockchip pm drivers" config RT_USING_PM_DVFS bool "enble dvfs" default n config RT_USING_PM_REQ_PWR bool "Enable request regulator volt" default n config RT_USING_PM_REQ_CLK bool "Enable request clk" default n config RT_USING_DVFS_DBG bool "Enable dvfs debug" default n config RT_USING_PM_RUNTIME bool "Enable pm runtime" default n config RT_USING_PM_IDLE_NORMAL bool "Enable pm runtime idle normal mode" depends on RT_USING_PM_RUNTIME default n config RT_USING_PM_TICK_DELAY bool "Enable tick delay" depends on RT_USING_PM_RUNTIME default n help when system is in the idle thread, no timer is triggered or some timers maybe wait a long time to be triggered. enable this and make the system tick delayed. config RT_USING_PM_TIMER bool "Enable pm timer" default n endmenu menu "RT-Thread rockchip mipi-dphy driver" config RT_USING_MIPI_DPHY bool "Enable MIPI_DPHY" default n endmenu menu "RT-Thread rockchip isp driver" config RT_USING_ISP bool "Enable ISP1" default n select RT_USING_CAMERA select RT_USING_ULOG if RT_USING_ISP config RT_ISP_GREY_ENABLE bool "Enable ISP Grey Out" depends on RT_USING_ISP default n config RT_ISP_RGB_RAW_OUTPUT bool "Enable ISP RGB RAW OUTPUT" depends on RT_USING_ISP default n endif config RT_USING_ISP3 bool "Enable ISP3" default n select RT_USING_CAMERA config RT_USING_ISP_DDR_ADRESS hex "isp ddr phy address" default 0x860000 depends on RT_USING_ISP3 || RT_USING_ISP config RT_USING_ISP_DDR_SIZE hex "isp ddr size" default 0x600000 depends on RT_USING_ISP3 || RT_USING_ISP choice prompt "data channel for isp input" depends on RT_USING_ISP || RT_USING_ISP3 default RT_USING_CHANNEL_MIPI config RT_USING_CHANNEL_MIPI bool "Enable mipi for isp" config RT_USING_CHANNEL_DVP bool "Enable dvp for isp" config RT_USING_CHANNEL_LVDS bool "Enable lvds for isp" endchoice endmenu menu "RT-Thread rockchip vcm driver" config RT_USING_VCM bool "Enable VCM" default n endmenu menu "RT-Thread rockchip vicap driver" config RT_USING_VICAP bool "Enable VICAP" default n choice prompt "camera sensor interface work mode" depends on RT_USING_VICAP default RT_USING_VICAP_WORKMODE_BLOCK_PINGPONG config RT_USING_VICAP_WORKMODE_FRAME_ONEFRAME bool "Enable frame oneframe mode" config RT_USING_VICAP_WORKMODE_FRAME_PINGPONG bool "Enable frame pingpong mode" config RT_USING_VICAP_WORKMODE_BLOCK_PINGPONG bool "Enable block pingpong mode" endchoice endmenu menu "RT-Thread rockchip camera driver" config RT_USING_CAMERA bool "Enable camera framework" default n menu "supported camera" config RT_USING_GC2145 bool "Enable GC2145" config RT_USING_OV8825 bool "Enable OV8825" config RT_USING_OV5695 bool "Enable OV5695" config RT_USING_GC5035 bool "Enable GC5035" config RT_USING_OV02k10 bool "Enable OV02k10" config RT_USING_GC2053 bool "Enable GC2053" config RT_USING_F37 bool "Enable F37" config RT_USING_SC230AI bool "Enable SC230AI" config RT_USING_SC231HAI bool "Enable SC231HAI" config RT_USING_SC501AI bool "Enable SC501AI" config RT_USING_SC530AI bool "Enable SC530AI" config RT_USING_SC223A bool "Enable SC223A" config RT_USING_SC2336 bool "Enable SC2336" config RT_USING_SC2336P bool "Enable SC2336P" config RT_USING_SC301IOT bool "Enable SC301IOT" config RT_USING_SC3336 bool "Enable SC3336" config RT_USING_SC3336P bool "Enable SC3336P" config RT_USING_SC3338 bool "Enable SC3338" config RT_USING_SC4336 bool "Enable SC4336" config RT_USING_SC4336P bool "Enable SC4336P" config RT_USING_SC401AI bool "Enable SC401AI" config RT_USING_GC3003 bool "Enable GC3003" config RT_USING_SC200AI bool "Enable SC200AI" config RT_USING_GC2093 bool "Enable GC2093" config RT_USING_OS02K10 bool "Enable OS02K10" config RT_USING_IMX415 bool "Enable IMX415" config RT_USING_OS04D10 bool "Enable OS04D10" config RT_USING_SC450AI bool "Enable SC450AI" config RT_USING_GC4023 bool "Enable GC4023" config RT_USING_SC431HAI bool "Enable SC431HAI" config RT_USING_OS03B10 bool "Enable OS03B10" endmenu endmenu menu "RT-Thread rockchip ambient light sensor driver" config RT_USING_ALS bool "Ambient light sensor driver config" default n choice prompt "Select ambient light sensor" depends on RT_USING_ALS config RT_USING_ALS_LTR308 bool "Enable Lite-On LTR308 ambient light sensor" endchoice endmenu menu "RT-Thread rockchip vicap_lite driver" config RT_USING_VICAP_LITE bool "Enable VICAP_LITE" default n endmenu menu "RT-Thread rockchip csi2host driver" config RT_USING_CSI2HOST bool "Enable CSI2HOST" default n endmenu menu "RT-Thread rockchip buffer_manage driver" config RT_USING_BUFFER_MANAGE bool "Enable BUFFER_MANAGE" default n endmenu menuconfig RT_USING_TOUCH_DRIVERS bool "Touch drivers config" depends on RT_USING_TOUCH default n if RT_USING_TOUCH_DRIVERS choice prompt "Choose touch driver" default RT_USING_TOUCH_GTXX config RT_USING_TOUCH_GTXX bool "GT touch driver select" config RT_USING_TOUCH_S3706 bool "S3706 touch driver select" config RT_USING_CSTXX bool "CST touch driver select" config RT_USING_CYTTSP5 bool "Cyttsp5 touch driver select" config RT_USING_IT7259 bool "IT7259 touch driver select" endchoice config RT_TOUCH_X_RANGE int "touch x range" default 720 config RT_TOUCH_Y_RANGE int "touch y range" default 1280 endif config RT_USING_SENSOR_HUB bool "Enable Sensor Hub" choice prompt "Choose a Sensor Hub" depends on RT_USING_SENSOR_HUB config RT_USING_CYW90721 bool "cypress cyw920721" config RT_USING_TALARIA bool "Innophase Talaria 2" endchoice config RT_USING_WDT_DUMP bool "Dump thread info when wdt timeout" depends on RT_USING_WDT && RT_USING_CMBACKTRACE default n menuconfig RT_USING_QPIPSRAM bool "Enable ROCKCHIP QPI Psram" select RT_USING_PSRAM default n if RT_USING_QPIPSRAM config RT_QPIPSRAM_SPEED int "Reset the speed of QPI Psram in Hz" default 40000000 help Reset the speed of QPI Psram based on QPI Psram characteristics and usually it range from 80MHz to 133MHz. At the same time, the max rate of SPI host should be concerned. choice prompt "Choose QPI Psram Adapter" default RT_USING_QPIPSRAM_SPI_HOST config RT_USING_QPIPSRAM_FSPI_HOST bool "Attach FSPI controller to QPI Psram" if RT_USING_QPIPSRAM_FSPI_HOST config RT_USING_QPIPSRAM_FSPI_HOST_CS1 bool "Extend QPI Psram on FSPI cs1" default 0 if RT_USING_QPIPSRAM_FSPI_HOST_CS1 config RT_USING_QPIPSRAM_FSPI_HOST_CS1_GPIO bool "Extend QPI Psram on FSPI cs1 with cs-gpio" default 1 endif endif if RT_USING_QPIPSRAM_FSPI_HOST config RT_USING_QPIPSRAM_FSPI_HOST_CS2 bool "Extend QPI Psram on FSPI cs2" default 0 if RT_USING_QPIPSRAM_FSPI_HOST_CS2 config RT_USING_QPIPSRAM_FSPI_HOST_CS2_GPIO bool "Extend QPI Psram on FSPI cs2 with cs-gpio" default 2 endif endif if RT_USING_QPIPSRAM_FSPI_HOST config RT_USING_QPIPSRAM_FSPI_HOST_CS3 bool "Extend QPI Psram on FSPI cs3" default 0 if RT_USING_QPIPSRAM_FSPI_HOST_CS3 config RT_USING_QPIPSRAM_FSPI_HOST_CS3_GPIO bool "Extend QPI Psram on FSPI cs3 with cs-gpio" default 3 endif endif config RT_USING_QPIPSRAM_SPI_HOST bool "Attach SPI controller to QPI Psram" if RT_USING_QPIPSRAM_SPI_HOST config RT_QPIPSRAM_SPI_DEVICE_NAME string "the name of the SPI device which is used as QPIPSRAM adapter" default "spi2_0" endif endchoice endif menu "RT-Thread rockchip coredump driver" config RT_USING_COREDUMP bool "Enable coredump" default n config RT_USING_COREDUMP_SDCARD bool "Enable coredump by Sdcard" depends on RT_USING_COREDUMP default n config RT_USING_COREDUMP_FLASH bool "Enable coredump by flash" depends on RT_USING_COREDUMP && (!PKG_CMBACKTRACE_FAULT_DUMP_TO_FLASH) default n endmenu menuconfig RT_USING_SPINAND bool "Enable ROCKCHIP SPI Nand Flash" select RT_USING_MTD default n if RT_USING_SPINAND config RT_SPINAND_SPEED int "Reset the speed of SPI Nand flash in Hz" default 80000000 help Reset the speed of SPI Nand flash based on SPI Nand characteristics, usually it range from 80MHz to 133MHz. choice prompt "Choose SPI Nand Flash Adapter" default RT_USING_SPINAND_FSPI_HOST config RT_USING_SPINAND_FSPI_HOST bool "Attach FSPI controller to SPINAND" config RT_USING_SPINAND_SPI_HOST bool "Attach SPI controller to SPINAND" if RT_USING_SPINAND_SPI_HOST config RT_SPINAND_SPI_DEVICE_NAME string "the name of the SPI device which is used as SPINAND adapter" default "spi1_0" endif endchoice endif menu "Enable PSTORE" config RT_USING_PSTORE bool "PSTORE" default n if RT_USING_PSTORE config PERSISTENT_RAM_ADDR hex "PSTORE ram addr" default 0 config PERSISTENT_RAM_SIZE hex "PSTORE ram size" default 0 endif endmenu menu "RT-Thread rockchip AMP driver" config RT_USING_RPMSG_LITE bool "Enable RPMSG LITE" depends on BSP_RK3308 || BSP_RK3568 default n endmenu endmenu