luckfox-pico-sdk/sysdrv/source/uboot/u-boot/arch/arm/mach-rockchip/spl-boot-order.c

/*
 * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
 *
 * SPDX-License-Identifier:     GPL-2.0+
 */

#include <common.h>
#include <dm.h>
#include <mmc.h>
#include <nand.h>
#include <spl.h>

#ifdef CONFIG_SPL_RAM_DEVICE
void board_boot_order(u32 *spl_boot_list)
{
	spl_boot_list[0] = BOOT_DEVICE_RAM;
}
#else

#if CONFIG_IS_ENABLED(OF_CONTROL) && ! CONFIG_IS_ENABLED(OF_PLATDATA)
/**
 * spl_node_to_boot_device() - maps from a DT-node to a SPL boot device
 * @node:	of_offset of the node
 *
 * The SPL framework uses BOOT_DEVICE_... constants to identify its boot
 * sources.  These may take on a device-specific meaning, depending on
 * what nodes are enabled in a DTS (e.g. BOOT_DEVICE_MMC1 may refer to
 * different controllers/block-devices, depending on which SD/MMC controllers
 * are enabled in any given DTS).  This function maps from a DT-node back
 * onto a BOOT_DEVICE_... constant, considering the currently active devices.
 *
 * Returns
 *   -ENOENT, if no device matching the node could be found
 *   -ENOSYS, if the device matching the node can not be mapped onto a
 *            SPL boot device (e.g. the third MMC device)
 *   -1, for unspecified failures
 *   a positive integer (from the BOOT_DEVICE_... family) on succes.
 */
static int spl_node_to_boot_device(int node)
{
	struct udevice *parent;

	if (!uclass_get_device_by_of_offset(UCLASS_UFS, node, &parent))
		return BOOT_DEVICE_UFS;

	/*
	 * This should eventually move into the SPL code, once SPL becomes
	 * aware of the block-device layer.  Until then (and to avoid unneeded
	 * delays in getting this feature out, it lives at the board-level).
	 */
	if (!uclass_get_device_by_of_offset(UCLASS_MMC, node, &parent)) {
		struct udevice *dev;
		struct blk_desc *desc = NULL;

		for (device_find_first_child(parent, &dev);
		     dev;
		     device_find_next_child(&dev)) {
			if (device_get_uclass_id(dev) == UCLASS_BLK) {
				desc = dev_get_uclass_platdata(dev);
				break;
			}
		}

		if (!desc)
			return -ENOENT;

		switch (desc->devnum) {
		case 0:
			return BOOT_DEVICE_MMC1;
		case 1:
			return BOOT_DEVICE_MMC2;
		default:
			return -ENOSYS;
		}
	}

	/*
	 * SPL doesn't differentiate SPI flashes, so we keep the detection
	 * brief and inaccurate... hopefully, the common SPL layer can be
	 * extended with awareness of the BLK layer (and matching OF_CONTROL)
	 * soon.
	 */
	if (!uclass_get_device_by_of_offset(UCLASS_SPI_FLASH, node, &parent))
#ifndef CONFIG_SPL_MTD_SUPPORT
		return BOOT_DEVICE_SPI;
#else
		return BOOT_DEVICE_MTD_BLK_SPI_NOR;

	if (!uclass_get_device_by_of_offset(UCLASS_MTD, node, &parent)) {
		struct udevice *dev;
		struct blk_desc *desc = NULL;

		for (device_find_first_child(parent, &dev);
		     dev;
		     device_find_next_child(&dev)) {
			if (device_get_uclass_id(dev) == UCLASS_BLK) {
				desc = dev_get_uclass_platdata(dev);
				break;
			}
		}

		if (!desc)
			return -ENOENT;

		switch (desc->devnum) {
		case 0:
			return BOOT_DEVICE_MTD_BLK_NAND;
		case 1:
			return BOOT_DEVICE_MTD_BLK_SPI_NAND;
		default:
			return -ENOSYS;
		}
	}
#endif

	/*
	 * This should eventually move into the SPL code, once SPL becomes
	 * aware of the block-device layer.  Until then (and to avoid unneeded
	 * delays in getting this feature out, it lives at the board-level).
	 */
	if (!uclass_get_device_by_of_offset(UCLASS_RKNAND, node, &parent))
		return BOOT_DEVICE_RKNAND;

	return -1;
}

/**
 * board_spl_was_booted_from() - retrieves the of-path the SPL was loaded from
 *
 * To support a 'same-as-spl' specification in the search-order for the next
 * stage, we need a SoC- or board-specific way to handshake with what 'came
 * before us' (either a BROM or TPL stage) and map the info retrieved onto
 * a OF path.
 *
 * Returns
 *   NULL, on failure or if the device could not be identified
 *   a of_path (a string), on success
 */
__weak const char *board_spl_was_booted_from(void)
{
	debug("%s: no support for 'same-as-spl' for this board\n", __func__);
	return NULL;
}

void board_boot_order(u32 *spl_boot_list)
{
	const void *blob = gd->fdt_blob;
	int chosen_node = fdt_path_offset(blob, "/chosen");
	int idx = 0;
	int elem;
	int boot_device;
	int node;
	const char *conf;

	if (chosen_node < 0) {
		debug("%s: /chosen not found, using spl_boot_device()\n",
		      __func__);
		spl_boot_list[0] = spl_boot_device();
		return;
	}

	for (elem = 0;
	     (conf = fdt_stringlist_get(blob, chosen_node,
					"u-boot,spl-boot-order", elem, NULL));
	     elem++) {
		const char *alias;

		/* Handle the case of 'same device the SPL was loaded from' */
		if (strncmp(conf, "same-as-spl", 11) == 0) {
			conf = board_spl_was_booted_from();
			if (!conf)
				continue;
		}

		/* First check if the list element is an alias */
		alias = fdt_get_alias(blob, conf);
		if (alias)
			conf = alias;

		/* Try to resolve the config item (or alias) as a path */
		node = fdt_path_offset(blob, conf);
		if (node < 0) {
			debug("%s: could not find %s in FDT", __func__, conf);
			continue;
		}

		/* Try to map this back onto SPL boot devices */
		boot_device = spl_node_to_boot_device(node);
		if (boot_device < 0) {
			debug("%s: could not map node @%x to a boot-device\n",
			      __func__, node);
			continue;
		}

		spl_boot_list[idx++] = boot_device;
	}

	/* If we had no matches, fall back to spl_boot_device */
	if (idx == 0)
		spl_boot_list[0] = spl_boot_device();
}
#endif
#endif