luckfox-pico-sdk/sysdrv/source/uboot/u-boot/board/varisys/cyrus
2023-08-08 20:36:47 +08:00
..
cyrus.c creat: first commit 2023-08-08 20:36:47 +08:00
cyrus.h creat: first commit 2023-08-08 20:36:47 +08:00
ddr.c creat: first commit 2023-08-08 20:36:47 +08:00
eth.c creat: first commit 2023-08-08 20:36:47 +08:00
Kconfig creat: first commit 2023-08-08 20:36:47 +08:00
law.c creat: first commit 2023-08-08 20:36:47 +08:00
MAINTAINERS creat: first commit 2023-08-08 20:36:47 +08:00
Makefile creat: first commit 2023-08-08 20:36:47 +08:00
pbi.cfg creat: first commit 2023-08-08 20:36:47 +08:00
pci.c creat: first commit 2023-08-08 20:36:47 +08:00
rcw_p5020_v2.cfg creat: first commit 2023-08-08 20:36:47 +08:00
rcw_p5040.cfg creat: first commit 2023-08-08 20:36:47 +08:00
README creat: first commit 2023-08-08 20:36:47 +08:00
tlb.c creat: first commit 2023-08-08 20:36:47 +08:00

Rebuilding u-boot for Cyrus

The Cyrus defconfigs are Cyrus_P5020_defconfig and Cyrus_P5040_defconfig.

They currently disable size optimization in order to avoid a relocation
bug in some versions of GCC. As the output size is a constant, the size
optimization is not currently important.

Cyrus boots off a microSD card in a slot on the motherboard. This requires
that the u-boot is built for the Pre-Boot Loader on the P5020/P5040.
In order to reflash u-boot, you must download u-boot.pbl, then write it
onto the card. To do that from u-boot:

> tftp 1000000 u-boot.pbl
> mmc write 1000000 8 672

If you want to do this via a card reader in linux:

> dd if=u-boot.pbl of=/dev/sdX bs=512 oseek=8