userbogd/webguiapp
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

serial port front and back implemented

Browse Source
This commit is contained in:
Bogdan Pilyugin 2023-10-16 14:43:26 +02:00
parent b689ab7948
commit 76e3d6b8c9
6 changed files with 141 additions and 85 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

35
Kconfig
View File

@ -787,14 +787,14 @@ menu "WebGUIApp"
menu "Serial port configuration" menu "Serial port configuration"
config UART_TRANSPORT_ENABLE config WEBGUIAPP_UART_TRANSPORT_ENABLE
bool "Enabled serial port" bool "Enabled serial port"
default n default n
help help
Set enabled uart output data Set enabled uart output data
if UART_TRANSPORT_ENABLE if WEBGUIAPP_UART_TRANSPORT_ENABLE
config UART_PORT_NUM config WEBGUIAPP_UART_PORT_NUM
int "UART port number" int "UART port number"
range 0 2 range 0 2
default 2 default 2
@ -802,20 +802,26 @@ menu "WebGUIApp"
UART communication port number for the example. UART communication port number for the example.
See UART documentation for available port numbers. See UART documentation for available port numbers.
config UART_TO_MQTT_BRIDGE_ENABLED config WEBGUIAPP_UART_ON
bool "Port is ON by default"
default y
help
Default port switched ON or OFF state
config WEBGUIAPP_UART_TO_MQTT_BRIDGE_ENABLED
bool "Enabled UART<->MQTT bridge" bool "Enabled UART<->MQTT bridge"
default n default n
help help
Switch on bridge uart to mqtt, else uart operate same way as rest and mqtt data exchange Switch on bridge uart to mqtt, else uart operate same way as rest and mqtt data exchange
config UART_BAUD_RATE config WEBGUIAPP_UART_BAUD_RATE
int "UART communication speed" int "UART communication speed"
range 1200 115200 range 1200 115200
default 115200 default 115200
help help
UART communication speed. UART communication speed.
config UART_RXD config WEBGUIAPP_UART_RXD
int "UART RXD pin number" int "UART RXD pin number"
range 0 39 range 0 39
default 35 default 35
@ -823,7 +829,7 @@ menu "WebGUIApp"
GPIO number for UART RX pin. See UART documentation for more information GPIO number for UART RX pin. See UART documentation for more information
about available pin numbers for UART. about available pin numbers for UART.
config UART_TXD config WEBGUIAPP_UART_TXD
int "UART TXD pin number" int "UART TXD pin number"
range 0 33 range 0 33
default 33 default 33
@ -832,15 +838,7 @@ menu "WebGUIApp"
about available pin numbers for UART. about available pin numbers for UART.
config UART_MODE_RS485_ENABLED config WEBGUIAPP_UART_RTS
bool "Enabled RS485 mode"
default n
help
Set UART to RS485 mode with hardware driver
if UART_MODE_RS485_ENABLED
config UART_RTS
int "RS485 RE/DE pin number" int "RS485 RE/DE pin number"
range -1 33 range -1 33
default 32 default 32
@ -848,11 +846,10 @@ menu "WebGUIApp"
GPIO number for UART RTS pin. This pin is connected to GPIO number for UART RTS pin. This pin is connected to
~RE/DE pin of RS485 transceiver to switch direction. ~RE/DE pin of RS485 transceiver to switch direction.
endif
config UART_BUF_SIZE config WEBGUIAPP_UART_BUF_SIZE
int "UART RAM buffer size" int "UART RAM buffer size"
range 64 4096 range 64 8192
default 1024 default 1024
help help
UART buffer size both for rx and tx. UART buffer size both for rx and tx.

17
include/SysConfiguration.h
View File

@ -189,6 +189,22 @@ typedef struct
} gsmSettings; } gsmSettings;
#endif #endif
#ifdef CONFIG_WEBGUIAPP_UART_TRANSPORT_ENABLE
struct
{
int Serialmode;
int BaudRate;
int InputBrake;
struct
{
bool IsSerialEnabled;
bool IsBridgeEnabled;
} Flags;
} serialSettings;
#endif
#ifdef CONFIG_WEBGUIAPP_LORAWAN_ENABLE
struct struct
{ {
char DevEui[8]; char DevEui[8];
@ -201,6 +217,7 @@ typedef struct
} Flags1; // Flag structure } Flags1; // Flag structure
} lorawanSettings; } lorawanSettings;
#endif
struct struct
{ {

16
src/MQTT.c
View File

@ -53,8 +53,6 @@ uint8_t MQTT2MessagesQueueStorageArea[MQTT_MESSAGE_BUFER_LENTH * sizeof(MQTT_DAT
mqtt_client_t mqtt[CONFIG_WEBGUIAPP_MQTT_CLIENTS_NUM] = { 0 }; mqtt_client_t mqtt[CONFIG_WEBGUIAPP_MQTT_CLIENTS_NUM] = { 0 };
static void mqtt_system_event_handler(int idx, void *handler_args, esp_event_base_t base, int32_t event_id, static void mqtt_system_event_handler(int idx, void *handler_args, esp_event_base_t base, int32_t event_id,
void *event_data); void *event_data);
@ -219,7 +217,9 @@ static void mqtt_system_event_handler(int idx, void *handler_args, esp_event_bas
ESP_LOGI(TAG, "sent subscribe successful, msg_id=%d", msg_id); ESP_LOGI(TAG, "sent subscribe successful, msg_id=%d", msg_id);
ESP_LOGI(TAG, "Subscribe to %s", topic); ESP_LOGI(TAG, "Subscribe to %s", topic);
#endif #endif
#ifdef CONFIG_UART_TO_MQTT_BRIDGE_ENABLED
if (GetSysConf()->serialSettings.Flags.IsBridgeEnabled)
{
ComposeTopic(topic, idx, EXTERNAL_SERVICE_NAME, DOWNLINK_SUBTOPIC); ComposeTopic(topic, idx, EXTERNAL_SERVICE_NAME, DOWNLINK_SUBTOPIC);
//Subscribe to the service called "APP" //Subscribe to the service called "APP"
msg_id = esp_mqtt_client_subscribe(client, (const char*) topic, 0); msg_id = esp_mqtt_client_subscribe(client, (const char*) topic, 0);
@ -227,7 +227,7 @@ static void mqtt_system_event_handler(int idx, void *handler_args, esp_event_bas
ESP_LOGI(TAG, "sent subscribe successful, msg_id=%d", msg_id); ESP_LOGI(TAG, "sent subscribe successful, msg_id=%d", msg_id);
ESP_LOGI(TAG, "Subscribe to %s", topic); ESP_LOGI(TAG, "Subscribe to %s", topic);
#endif #endif
#endif }
break; break;
case MQTT_EVENT_DISCONNECTED: case MQTT_EVENT_DISCONNECTED:
@ -289,14 +289,15 @@ static void mqtt_system_event_handler(int idx, void *handler_args, esp_event_bas
ESP_LOGE(TAG, "Out of free RAM for MQTT API handle"); ESP_LOGE(TAG, "Out of free RAM for MQTT API handle");
} }
#ifdef CONFIG_UART_TO_MQTT_BRIDGE_ENABLED
if (GetSysConf()->serialSettings.Flags.IsBridgeEnabled)
{
ComposeTopic(topic, idx, EXTERNAL_SERVICE_NAME, DOWNLINK_SUBTOPIC); ComposeTopic(topic, idx, EXTERNAL_SERVICE_NAME, DOWNLINK_SUBTOPIC);
if (!memcmp(topic, event->topic, event->topic_len)) if (!memcmp(topic, event->topic, event->topic_len))
{ {
TransmitSerialPort(event->data, event->data_len); TransmitSerialPort(event->data, event->data_len);
} }
#endif }
break; break;
case MQTT_EVENT_ERROR: case MQTT_EVENT_ERROR:
@ -549,4 +550,3 @@ esp_err_t ExtendedLog(esp_log_level_t level, char *format, ...)
return ESP_OK; return ESP_OK;
} }

17
src/RestApiHandler.c
View File

@ -478,6 +478,18 @@ const rest_var_t SystemVariables[] =
{ 0, "gsm_visible", (bool*) (&VAR_FALSE), VAR_BOOL, R, 0, 1 }, { 0, "gsm_visible", (bool*) (&VAR_FALSE), VAR_BOOL, R, 0, 1 },
#endif #endif
#ifdef CONFIG_WEBGUIAPP_UART_TRANSPORT_ENABLE
{ 0, "serial_enab", &SysConfig.serialSettings.Flags.IsSerialEnabled, VAR_BOOL, RW, 0, 1 },
{ 0, "serial_bridge", &SysConfig.serialSettings.Flags.IsSerialEnabled, VAR_BOOL, RW, 0, 1 },
{ 0, "serial_mode", &SysConfig.serialSettings.Serialmode, VAR_INT, RW, 1, 2 },
{ 0, "serial_baud", &SysConfig.serialSettings.BaudRate, VAR_INT, RW, 1200, 4096000 },
{ 0, "serial_break", &SysConfig.serialSettings.InputBrake, VAR_INT, RW, 1, 50 },
{ 0, "serial_visible", (bool*) (&VAR_TRUE), VAR_BOOL, RW, 0, 1 },
#else
{ 0, "serial_visible", (bool*) (&VAR_FALSE), VAR_BOOL, R, 0, 1 },
#endif
#ifdef CONFIG_WEBGUIAPP_LORAWAN_ENABLE #ifdef CONFIG_WEBGUIAPP_LORAWAN_ENABLE
{ 0, "lora_enab", &SysConfig.lorawanSettings.Flags1.bIsLoRaWANEnabled, VAR_BOOL, RW, 0, 1 }, { 0, "lora_enab", &SysConfig.lorawanSettings.Flags1.bIsLoRaWANEnabled, VAR_BOOL, RW, 0, 1 },
{ 0, "lora_visible", (bool*) (&VAR_TRUE), VAR_BOOL, RW, 0, 1 }, { 0, "lora_visible", (bool*) (&VAR_TRUE), VAR_BOOL, RW, 0, 1 },
@ -490,6 +502,11 @@ const rest_var_t SystemVariables[] =
{ 0, "lora_visible", (bool*) (&VAR_FALSE), VAR_BOOL, R, 0, 1 }, { 0, "lora_visible", (bool*) (&VAR_FALSE), VAR_BOOL, R, 0, 1 },
#endif #endif
#ifdef CONFIG_WEBGUIAPP_MBTCP_ENABLED #ifdef CONFIG_WEBGUIAPP_MBTCP_ENABLED
{ 0, "mbtcp_enab", &SysConfig.modbusSettings.IsModbusTCPEnabled, VAR_BOOL, RW, 0, 1 }, { 0, "mbtcp_enab", &SysConfig.modbusSettings.IsModbusTCPEnabled, VAR_BOOL, RW, 0, 1 },
{ 0, "mbtcp_port", &SysConfig.modbusSettings.ModbusTCPPort, VAR_INT, RW, 1, 65534 }, { 0, "mbtcp_port", &SysConfig.modbusSettings.ModbusTCPPort, VAR_INT, RW, 1, 65534 },

71
src/SerialPort.c
View File

@ -42,15 +42,16 @@
#define UART_TX_QUEUE_SIZE (5) #define UART_TX_QUEUE_SIZE (5)
#define UART_RX_QUEUE_SIZE (5) #define UART_RX_QUEUE_SIZE (5)
#define UART_DEBUG_MODE 0 #define UART_DEBUG_MODE 0
#ifdef CONFIG_WEBGUIAPP_UART_TRANSPORT_ENABLE
QueueHandle_t UARTtxQueueHandle; QueueHandle_t UARTtxQueueHandle;
static StaticQueue_t xStaticUARTtxQueue; static StaticQueue_t xStaticUARTtxQueue;
uint8_t UARTtxQueueStorageArea[UART_TX_QUEUE_SIZE * sizeof(UART_DATA_SEND_STRUCT)]; uint8_t UARTtxQueueStorageArea[UART_TX_QUEUE_SIZE * sizeof(UART_DATA_SEND_STRUCT)];
static QueueHandle_t uart_event_queue; static QueueHandle_t uart_event_queue;
static char rxbuf[CONFIG_UART_BUF_SIZE]; static char rxbuf[CONFIG_WEBGUIAPP_UART_BUF_SIZE];
esp_err_t TransmitSerialPort(char *data, int ln) esp_err_t TransmitSerialPort(char *data, int ln)
{ {
@ -95,8 +96,6 @@ static void ReceiveHandlerAPI()
} }
} }
void serial_RX_task(void *arg) void serial_RX_task(void *arg)
{ {
uart_event_t event; uart_event_t event;
@ -120,21 +119,22 @@ void serial_RX_task(void *arg)
if (event.timeout_flag) if (event.timeout_flag)
{ {
bzero(rxbuf, CONFIG_UART_BUF_SIZE); bzero(rxbuf, CONFIG_WEBGUIAPP_UART_BUF_SIZE);
uart_get_buffered_data_len(CONFIG_UART_PORT_NUM, (size_t*) &buffered_size); uart_get_buffered_data_len(CONFIG_WEBGUIAPP_UART_PORT_NUM, (size_t*) &buffered_size);
if (buffered_size) if (buffered_size)
{ {
uart_read_bytes(CONFIG_UART_PORT_NUM, rxbuf, buffered_size, 100); uart_read_bytes(CONFIG_WEBGUIAPP_UART_PORT_NUM, rxbuf, buffered_size, 100);
#if UART_DEBUG_MODE == 1 #if UART_DEBUG_MODE == 1
ESP_LOGI(TAG, "read of %d bytes: %s", buffered_size, rxbuf); ESP_LOGI(TAG, "read of %d bytes: %s", buffered_size, rxbuf);
#endif #endif
#ifdef CONFIG_UART_TO_MQTT_BRIDGE_ENABLED if (GetSysConf()->serialSettings.Flags.IsBridgeEnabled)
{
ExternalServiceMQTTSend(rxbuf, buffered_size, 0); ExternalServiceMQTTSend(rxbuf, buffered_size, 0);
ExternalServiceMQTTSend(rxbuf, buffered_size, 1); ExternalServiceMQTTSend(rxbuf, buffered_size, 1);
#else }
else
ReceiveHandlerAPI(); ReceiveHandlerAPI();
#endif
} }
} }
@ -148,7 +148,7 @@ void serial_RX_task(void *arg)
// If fifo overflow happened, you should consider adding flow control for your application. // If fifo overflow happened, you should consider adding flow control for your application.
// The ISR has already reset the rx FIFO, // The ISR has already reset the rx FIFO,
// As an example, we directly flush the rx buffer here in order to read more data. // As an example, we directly flush the rx buffer here in order to read more data.
uart_flush_input(CONFIG_UART_PORT_NUM); uart_flush_input(CONFIG_WEBGUIAPP_UART_PORT_NUM);
xQueueReset(uart_event_queue); xQueueReset(uart_event_queue);
break; break;
//Event of UART ring buffer full //Event of UART ring buffer full
@ -156,7 +156,7 @@ void serial_RX_task(void *arg)
ESP_LOGE(TAG, "ring buffer full"); ESP_LOGE(TAG, "ring buffer full");
// If buffer full happened, you should consider encreasing your buffer size // If buffer full happened, you should consider encreasing your buffer size
// As an example, we directly flush the rx buffer here in order to read more data. // As an example, we directly flush the rx buffer here in order to read more data.
uart_flush_input(CONFIG_UART_PORT_NUM); uart_flush_input(CONFIG_WEBGUIAPP_UART_PORT_NUM);
xQueueReset(uart_event_queue); xQueueReset(uart_event_queue);
break; break;
//Event of UART RX break detected //Event of UART RX break detected
@ -176,8 +176,8 @@ void serial_RX_task(void *arg)
//UART_PATTERN_DET //UART_PATTERN_DET
case UART_PATTERN_DET: case UART_PATTERN_DET:
uart_get_buffered_data_len(CONFIG_UART_PORT_NUM, (size_t*) &buffered_size); uart_get_buffered_data_len(CONFIG_WEBGUIAPP_UART_PORT_NUM, (size_t*) &buffered_size);
int pos = uart_pattern_pop_pos(CONFIG_UART_PORT_NUM); int pos = uart_pattern_pop_pos(CONFIG_WEBGUIAPP_UART_PORT_NUM);
#if UART_DEBUG_MODE == 1 #if UART_DEBUG_MODE == 1
ESP_LOGI(TAG, "[UART PATTERN DETECTED] pos: %d, buffered size: %d", (int )pos, (int )buffered_size); ESP_LOGI(TAG, "[UART PATTERN DETECTED] pos: %d, buffered size: %d", (int )pos, (int )buffered_size);
#endif #endif
@ -186,14 +186,14 @@ void serial_RX_task(void *arg)
// There used to be a UART_PATTERN_DET event, but the pattern position queue is full so that it can not // There used to be a UART_PATTERN_DET event, but the pattern position queue is full so that it can not
// record the position. We should set a larger queue size. // record the position. We should set a larger queue size.
// As an example, we directly flush the rx buffer here. // As an example, we directly flush the rx buffer here.
uart_flush_input(CONFIG_UART_PORT_NUM); uart_flush_input(CONFIG_WEBGUIAPP_UART_PORT_NUM);
} }
else else
{ {
uart_read_bytes(CONFIG_UART_PORT_NUM, rxbuf, pos, 100 / portTICK_PERIOD_MS); uart_read_bytes(CONFIG_WEBGUIAPP_UART_PORT_NUM, rxbuf, pos, 100 / portTICK_PERIOD_MS);
uint8_t pat[PATTERN_CHR_NUM + 1]; uint8_t pat[PATTERN_CHR_NUM + 1];
memset(pat, 0, sizeof(pat)); memset(pat, 0, sizeof(pat));
uart_read_bytes(CONFIG_UART_PORT_NUM, pat, PATTERN_CHR_NUM, 100 / portTICK_PERIOD_MS); uart_read_bytes(CONFIG_WEBGUIAPP_UART_PORT_NUM, pat, PATTERN_CHR_NUM, 100 / portTICK_PERIOD_MS);
#if UART_DEBUG_MODE == 1 #if UART_DEBUG_MODE == 1
ESP_LOGI(TAG, "read data: %s", rxbuf); ESP_LOGI(TAG, "read data: %s", rxbuf);
ESP_LOGI(TAG, "read pat : %s", pat); ESP_LOGI(TAG, "read pat : %s", pat);
@ -217,11 +217,11 @@ void static serial_TX_task(void *arg)
while (1) while (1)
{ {
xQueueReceive(UARTtxQueueHandle, &DSS, portMAX_DELAY); xQueueReceive(UARTtxQueueHandle, &DSS, portMAX_DELAY);
if (uart_write_bytes(CONFIG_UART_PORT_NUM, DSS.raw_data_ptr, DSS.data_length) if (uart_write_bytes(CONFIG_WEBGUIAPP_UART_PORT_NUM, DSS.raw_data_ptr, DSS.data_length)
!= DSS.data_length) != DSS.data_length)
ESP_LOGE(TAG, "RS485 write data failure"); ESP_LOGE(TAG, "RS485 write data failure");
free(DSS.raw_data_ptr); free(DSS.raw_data_ptr);
if (uart_wait_tx_done(CONFIG_UART_PORT_NUM, pdMS_TO_TICKS(1000)) != ESP_OK) if (uart_wait_tx_done(CONFIG_WEBGUIAPP_UART_PORT_NUM, pdMS_TO_TICKS(1000)) != ESP_OK)
ESP_LOGE(TAG, "RS485 transmit data failure"); ESP_LOGE(TAG, "RS485 transmit data failure");
} }
} }
@ -229,7 +229,7 @@ void static serial_TX_task(void *arg)
void InitSerialPort(void) void InitSerialPort(void)
{ {
uart_config_t uart_config = { uart_config_t uart_config = {
.baud_rate = CONFIG_UART_BAUD_RATE, .baud_rate = GetSysConf()->serialSettings.BaudRate,
.data_bits = UART_DATA_8_BITS, .data_bits = UART_DATA_8_BITS,
.parity = UART_PARITY_DISABLE, .parity = UART_PARITY_DISABLE,
.stop_bits = UART_STOP_BITS_1, .stop_bits = UART_STOP_BITS_1,
@ -237,15 +237,21 @@ void InitSerialPort(void)
.source_clk = UART_SCLK_APB, .source_clk = UART_SCLK_APB,
}; };
ESP_ERROR_CHECK(uart_driver_install(CONFIG_UART_PORT_NUM, CONFIG_UART_BUF_SIZE * 2, 0, 20, &uart_event_queue, 0)); ESP_ERROR_CHECK(
ESP_ERROR_CHECK(uart_param_config(CONFIG_UART_PORT_NUM, &uart_config)); uart_driver_install(CONFIG_WEBGUIAPP_UART_PORT_NUM, CONFIG_WEBGUIAPP_UART_BUF_SIZE * 2, 0, 20, &uart_event_queue, 0));
ESP_ERROR_CHECK(uart_set_pin(CONFIG_UART_PORT_NUM, CONFIG_UART_TXD, CONFIG_UART_RXD, CONFIG_UART_RTS, -1)); ESP_ERROR_CHECK(uart_param_config(CONFIG_WEBGUIAPP_UART_PORT_NUM, &uart_config));
ESP_ERROR_CHECK(uart_set_mode(CONFIG_UART_PORT_NUM, UART_MODE_RS485_HALF_DUPLEX)); ESP_ERROR_CHECK(uart_set_pin(CONFIG_WEBGUIAPP_UART_PORT_NUM,
CONFIG_WEBGUIAPP_UART_TXD, CONFIG_WEBGUIAPP_UART_RXD, CONFIG_WEBGUIAPP_UART_RTS, -1));
ESP_ERROR_CHECK(uart_enable_rx_intr(CONFIG_UART_PORT_NUM)); if (GetSysConf()->serialSettings.Serialmode == 2)
ESP_ERROR_CHECK(uart_set_rx_timeout(CONFIG_UART_PORT_NUM, UART_READ_TOUT)); ESP_ERROR_CHECK(uart_set_mode(CONFIG_WEBGUIAPP_UART_PORT_NUM, UART_MODE_RS485_HALF_DUPLEX));
else
ESP_ERROR_CHECK(uart_set_mode(CONFIG_WEBGUIAPP_UART_PORT_NUM, UART_MODE_UART));
ESP_ERROR_CHECK(uart_enable_rx_intr(CONFIG_WEBGUIAPP_UART_PORT_NUM));
ESP_ERROR_CHECK(uart_set_rx_timeout(CONFIG_WEBGUIAPP_UART_PORT_NUM, UART_READ_TOUT));
//ESP_ERROR_CHECK(uart_enable_pattern_det_baud_intr(CONFIG_UART_PORT_NUM, '+', PATTERN_CHR_NUM, 9, 0, 0)); //ESP_ERROR_CHECK(uart_enable_pattern_det_baud_intr(CONFIG_UART_PORT_NUM, '+', PATTERN_CHR_NUM, 9, 0, 0));
uart_pattern_queue_reset(CONFIG_UART_PORT_NUM, 20); uart_pattern_queue_reset(CONFIG_WEBGUIAPP_UART_PORT_NUM, 20);
UARTtxQueueHandle = NULL; UARTtxQueueHandle = NULL;
UARTtxQueueHandle = xQueueCreateStatic(UART_TX_QUEUE_SIZE, UARTtxQueueHandle = xQueueCreateStatic(UART_TX_QUEUE_SIZE,
@ -253,12 +259,11 @@ void InitSerialPort(void)
UARTtxQueueStorageArea, UARTtxQueueStorageArea,
&xStaticUARTtxQueue); &xStaticUARTtxQueue);
xTaskCreate(serial_TX_task, "RS485txTask", 1024 * 2, (void*) 0, 7, NULL); xTaskCreate(serial_TX_task, "serial_tx", 1024 * 2, (void*) 0, 7, NULL);
xTaskCreate(serial_RX_task, "RS485rxTask", 1024 * 4, (void*) 0, 12, NULL); xTaskCreate(serial_RX_task, "serial_rx", 1024 * 4, (void*) 0, 12, NULL);
ESP_LOGI(TAG, "Serial port initialized on UART%d with baudrate %d", CONFIG_UART_PORT_NUM, ESP_LOGI(TAG, "Serial port initialized on UART%d with baudrate %d", CONFIG_WEBGUIAPP_UART_PORT_NUM,
CONFIG_UART_BAUD_RATE); GetSysConf()->serialSettings.BaudRate);
} }
#endif

20
src/SysConfiguration.c
View File

@ -169,6 +169,12 @@ esp_err_t WebGuiAppInit(void)
} }
#endif #endif
#endif #endif
#if CONFIG_WEBGUIAPP_UART_TRANSPORT_ENABLE
InitSerialPort();
#endif
return ESP_OK; return ESP_OK;
} }
@ -389,6 +395,20 @@ esp_netif_str_to_ip4(CONFIG_WEBGUIAPP_DNS3_ADDRESS_DEFAULT, (esp_ip4_addr_t*) &C
memcpy(Conf->lorawanSettings.AppEui, temp, 8); memcpy(Conf->lorawanSettings.AppEui, temp, 8);
#endif #endif
#ifdef CONFIG_WEBGUIAPP_UART_TRANSPORT_ENABLE
Conf->serialSettings.Flags.IsSerialEnabled = false;
Conf->serialSettings.Flags.IsBridgeEnabled = false;
#ifdef CONFIG_WEBGUIAPP_UART_ON
Conf->serialSettings.Flags.IsSerialEnabled = true;
#endif
#ifdef CONFIG_WEBGUIAPP_UART_TO_MQTT_BRIDGE_ENABLED
Conf->serialSettings.Flags.IsBridgeEnabled = true;
#endif
Conf->serialSettings.Serialmode = 1;
Conf->serialSettings.BaudRate = CONFIG_WEBGUIAPP_UART_BAUD_RATE;
Conf->serialSettings.InputBrake = 50;
#endif
#ifdef CONFIG_WEBGUIAPP_MBTCP_ENABLED #ifdef CONFIG_WEBGUIAPP_MBTCP_ENABLED
Conf->modbusSettings.IsModbusTCPEnabled = false; Conf->modbusSettings.IsModbusTCPEnabled = false;
#if CONFIG_WEBGUIAPP_MBTCP_ON == 1 #if CONFIG_WEBGUIAPP_MBTCP_ON == 1